FloPlast Compression MDPE Reducing Tee Fitting – 32mm

Description

FloPlast Compression MDPE Reducing Tee Fitting – 32mm (32mm x 32mm x 25mm)

Floplast range of MDPE fittings are suitable for use above and below ground for mains cold water supplies.

Connects two lengths of MDPE pipe of the same diameter, with a third smaller diameter length of MDPE pipe branching off.

High impact resistant body and nut which enables it to absorb thermal and mechanical stress.

The fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring, and nitrile seal.

Excellent pressure resistance, tested to 48 bars. Conformably exceeds the water requirements of the UK water bylaws scheme.

A simple few turns of the nut create your compression joint with the grab ring taking hold.

Other Sizes Available: 20, 25 & 32mm 

Technical Specifications:

• Compression MDPE Reducing Tee Fitting
• Manufactured to BS 6572:1985 (Blue)
• Compact Design
• WRAS Approved (Water Regulations Approval Scheme)
• Material: Polyethylene
• Brand FloPlast
• Female Adaptor
• 90 Degree Angle
• Colour: Blue
• Pressure Resistance
• High Impact Resistant Body
• Size – 32mm

Please Note: To maintain a rigid and reliable joint connection, it is highly advised that a pipe liner (also known as a stiffener or insert) is also used, these can also be purchased.

Can’t find what you are looking for? Contact us on 01452 238287

Additional information

Weight	0.27 kg
Brand
Manufacturer Number
UPCEAN Number
Product Type	MDPE Reducing Tee, Reducing Tee
Pipe Size	,