E3998- TALBOT Reducing Tee (63mm X 63mm X 25mm)

Description

TALBOT reducing tees for connecting MDPE to all three branches are available in 5 variations all available in this section. For other sizes you can enter the product code shown below into the search above or 

• 25mm x 25mm x 20mm Talbot Pushfit Reducing Tees on Branch – Talbot Product Code E3036
• 32mm x 20mm x 20mm Talbot Pushfit Reducing Tees on Branch – Talbot Product Code E3038
  
• 32mm x 32mm x 25mm Talbot Pushfit Reducing Tees on Branch – Talbot Product Code E3041
  
• 32mm x 32mm x 20mm Talbot Pushfit Reducing Tees on Branch – Talbot Product Code E3040
  
• 63mm x 63mm x 25mm Talbot Pushfit Reducing Tees on Branch – Talbot Product Code E3998
  

 

The Talbot Pushfit joint is a tried and tested method of jointing low, medium and high density polyethylene water pipe, from 16mm to 180mm and their imperial equivalents. The fitting is quick and easy with no nuts to leave undone – simply push the pipe into the joint. The joint’s grip and seal on the pipe increases with water pressure and tensile load which means that the pipe will burst or neck before the joint fails.

Using a common body and only two sets of interchangable components, Talbot Pushfit will connect to metric PE pipes and their imperial equivalents

Additional information

Weight	0.73 kg
Brand
Manufacturer Number
UPCEAN Number
Product Type	MDPE Reducing Tee, Reducing Tee
Pipe Size	,